10 Pin Connector 527ID-IHD: For 582, 582L, 585, 600L, 620L, 1650, 1850, BBFF1, DFF1 and 7000FNT units.

Bare Wire 527ID-IHN: For 292, 295, 1100, 1150, 1200, 1250, 1500, BBFF3 and DFF3 units.

The 200 kHz element provides broadband performance resulting in higher-resolution without sacrificing sensitivity. Combined with a seven-element 50 kHz array, this in-hull has excellent deep-water detection. Because the M260 has narrow beams at both frequencies, separation of individual targets and the ability to distinguish between fish and the bottom makes finding fish easy.

All-Out Fishfinding Performance!
Optimal fishfinder performance no longer requires drilling a hole in the hull! The M260 is able to transmit and receive through solid fiberglass, displaying sharp detailed images. Track the bottom at speeds exceeding 30 knots (34 MPH)! Installation simply requires adhering the tank to the inside of the vessel, leaving a clean and smooth hull exterior!

Fishing Applications
• Blue-water trolling using 50 kHz
• Deep-water bottom and wreck fishing up to 800 m (2,625’)

Features
• Top-of-the-line broadband, in-hull transducer
• Recommended for solid fiberglass hulls
• Depth only
• Innovative tank design allows for bow-stern or port-starboard mounting
• Non-toxic anti-freeze (propylene glycol) is used to fill the tank
• Fiberglass resin is used to adhere tank to the hull
• Interfaces to any 600 W or 1 kW echosounder
• Boat Size: 8 m (25’) and up

• In-Hull transducer
• Connector (see options)
• Transducer case
• Cable
• Funnel
• Manual

10 Pin Connector: For 582, 582L, 585, 600L, 620L, 1650, 1850, BBFF1, DFF1 and 7000FNT units.

Bare Wire: For 292, 295, 1100, 1150, 1200, 1250, 1500, BBFF3 and DFF3 units.