The CannonLink System Module enables any Fishing System to control the operation of up to 6 Cannon Mag20 DT and the Mag20 DT/HS downriggers. Through an intuitive menu controlled from the Fishing System, the user can quickly set-up and update settings that operate the downriggers. When fishing short-handed on the boat, the CannonLink module enables the captain to easily operate the downriggers from the console, while the mate tends to the rigging lines.
Humminbird Downrigger Controller Benefits:
- Automatically deploy or retrieve downriggers directly from any Fishing System.
- Set the downrigger operation mode to Manual for complete control, Bottom Track to maintain distance off the bottom or Cycle to continuously move the downriggers between two depths.
- Monitor the downrigger depth and operation graphically on-screen combined with the sonar graph.
- View temperature at depth, speed-through-water and water clarity on the Fishing System screen when using the Cannon Speed-NTemp Sensor.
- Simultaneously, or individually control up to 6 Cannon Mag20 DT and the Mag20 DT/HS downriggers.
By viewing sonar, temperature at depth and clarity information on screen while piloting the boat, the Captain can monitor and position downriggers in real-time to the optimal depth to vastly increase the catch.
For Use With: 997C SI, 967C 3D, 957C, 955C, 917C, 797C2 SI, 787C2, 785C2, 777C2, 767, 757C, 755C, 747C, 737, 727, 717, Matrix 97, Matrix 47 3D, Matrix 12
