- Complies with the latest IMO standard ITU-RM.1371-3
- Identify other AIS enabled ships by its’ correlated UAIS identification
- Contact other ships using the Call Signs presented by the AIS Screen
- Receive an instant overview of traffic situations and the maneuvers of other ship
- Able to get detailed information on AIS enabled ships in radar blind zones
Adding AIS to navigation for spontaneous ‘ship to ship’ or ‘ship to shore’ recognition greatly enhances safety at sea and provides mariners with new levels of real-time information. Designed with the deep sea commercial mariner in mind, we have created multiple configurations to suit the size and complexity of any vessel.
The MX535A transponder, is a fully IMO-compliant STDMA unit remotely controlled by MX512 Control and Display unit. Transponder system setups and controls is configured in the MX512. It can also gather the ship’s sensor data and organizes the information for transmission via AIS. The ship’s ECDIS, ARPA and Pilot’s PC all have access to both the D/GPS and the AIS information via the high-speed serial ports of the MX535/MX512.
Password protected menus allow you to safely and simply enter all Static and Voyage related AIS information. AIS Situation Displays give you immediate and continuous graphic and/or text information about AIS equipped ships and shore stations as they come into radio range.
GPS / NAVIGATION
- GPS Receiver Channels
- 12 channels
- GPS: Tracking Capability
- 12 Satellites (sim.)
- GPS: Vertical Accuracy
- < 15 m / 2 drms
- DGPS: Accuracy
- < 5 m / 2 dms
- DGPS: Receiver Type
- 12 Channel, (L1)
- DGPS: Horizontal Accuracy
- < 10 m / 2 drms
- DGPS: Frequency Range
- 156 MHz - 162 MHz
- DGPS: Adjacent Channel Rejection
- > 70 dB (25 kHz), > 60 dB (12.5 kHz)
NETWORKING / CONNECTORS
- Connectors
- 50 Pin D-Sub (Male), N-Type (Female) VHF, TNC (Female) GPS
COMMUNICATIONS
- VHF Channel Spacing
- 12.5 or 25 kHz
- Number of RF Channels
- 3 Recieve / 1 Transmit
- Number of AIS Channels
- 2 Recieve
- Number of DSC Channels
- 1 Recieve
- VHF Frequency Error
- +/- 2.5 ppm
- VHF Rx to Tx Switching Time
- < 1 ms
- VHF Transmit Release Time
- < 1 ms
- Automatic Shutdown
- 1 sec.
- Channel Switching Time
- < 25 ms
- Attack Time
- < 1 ms
- VHF Receiver Max Usable Sensitivity
- < -110 dBm
- VHF Receiver Co-Chan Rejection
- > -3 dB (25 kHz), > -12 dBm (12.5 kHz)
- VHF Receiver Inter-modulation Rejection
- > 65 dB
- VHF Receiver Spurious Response Rejection
- > 70 dB
- VHF Receiver Blocking
- > 84 dB
- VHF Modem: Bit Rate GMSK
- 9600 bps
- VHF Modem: RF Baud Rate (DSC)
- 1200 bps
- VHF Modem: Modulation
- GMSK/fFSK
TECHNICAL / ENVIRONMENTAL
- Width
- 281.26 mm \ 11.1 in
- Height
- 201.26 mm \ 7.9 in
- Depth
- 60 mm \ 2.4 in
POWER
- Power Supply
- 24 VDC (+/- 10%) (galvanic isolated) vDC
- Power Supply: Input Current
- min. 7 Amp. (24V)
- Power Consumption
- < 3 W, < 230mA @ 12VDC
- Reverse Polarity Protection
- Yes
OTHER
- List of Specified Standards
IMO MSC.74(69) Annex 3
ITU-R M.1371 (Class A)
IALA Tech. Clar. of ITU-R M.1371-1 (Ed. 1.3)
IEC 61993-2 (2002)
IEC 61162-1 (2000) - NMEA 0183-3
IEC 61162-2 (1998) - NMEA 0183-3
IEC 61162-3 --------- NMEA 0183 (2000)
ITU-R M.823-2
IEC 61106-1 (1996)
IEC 60 945 (1996)
ITU-R M.823-3
ITU-R M.1064.3
- Operating Temperature
- -15°C to 55°C (5°F to 131°F)
- Output Power
- 2 Watt (low) or 12.5 Watt (high) kW
- MX535A AIS Transponder
- MX 535 Mounting Kit
- MX 535 AIS Interface Cable
- MX 535 GPS/VHF Cable
- MX512 CDU with 12-PIN Power cable
- MX512 Junction Box without 12- PIN Power Cable
- GPS Antenna High Gain No Cable
- MX535 Manual
- MX521A DGPS antenna
- AIS License
*VHF antenna and antenna cables are not included
