Xantrex MS3000 power factor corrected three-stage charger provides long battery life by recharging batteries quickly, while using less AC power. The rugged UL458 Marine design delivers reliable power in demanding marine conditions. An aluminum chassis, conformal-coated components, and high-temperature operation guarantee long-term, trouble-free performance. MS Series Inverter/Chargers meet strict electromagnetic standards, designed to minimize interference with radios and other onboard electronics.

MS Series Inverter/Chargers are Xanbus enabled, so it’s easy to connect network-enabled accessories and share power status and diagnostic information with other devices. Xanbus makes power management less complex, while intelligently optimizing available power resources. MS Series Inverter/Chargers have built-in flash memory so their software can be upgraded to take advantage of new features and system enhancements.

Product Features 

• 3000-watt inverter with 250% surge for five seconds
• True sine wave output to power the latest appliances and electronics
• 0.95 power factor corrected multi-stage charger for fast, efficient charging
• Full power output to 122ºF (50ºC)
• Power sharing reduces charging current to prevent tripping of AC input breaker
• Built-in transfer switch automatically transfers between inverter power and incoming AC power
• Meets UL458 marine standards and FCC Class B regulations
• Xanbus enabled
• Drip shield for UL marine compliance

Protection Features 

• Battery over-voltage and under-voltage protection
• Over-temperature protection
• Automatic overload protection
• Short-circuit protection

Electrical Specifications
Output power (continuous)	3000 watts
Surge rating (5 second)	7500 watts (60 A)
Output voltage	120 Vac
Output waveform	Sine wave < 3% THD
Output frequency	60 Hz +/- 0.05% (crystal controlled)
Efficiency (full load)	> 85%
Peak efficiency	> 90%
No load power draw (search mode)	< 20 W
AC transfer switch	Two legs at 50 A (split phase in), Two legs at 30 A (dual in)
Transfer time	20 ms (typical)
Electrical Specifications-Charger
Output current	150 Adc
Battery voltage (nominal)	12 Vdc
Battery voltage range	10.0 - 15.5 Vdc
Charge Control	3-stage with manual equalize
Charge temperature compensation	Remote battery sensor (included)
Efficiency	85% (typical)
AC input power factor	0.95
Input current (for 100A charging)	22 Arms (nominal)
AC input voltage	120 Vac nominal
AC input voltage range	90 - 135 VAC
Compatible battery types	Wet / Gel / AGM
Echo charge output current	Not applicable
General Specifications
Operating temperature Range	-4°F - 122°F (-20°C - 50°C)
Storage temperature	-40°F - 122°F (-40°C - 50°C)
Dimensions (H x W x D)	8.17 x 13.25 x 16"  (208 x 336 x 406 mm)
Weight	70.0 lb / 31.8 kg
Warranty	Two years
Part Number	809-3010
Accessories	System Control Panel	809-0910
	Automatic Generator Start	809-0915
	Network Connector	809-0903
	Network Cable 3’	809-0935
	Network Cable 5’	809-0936
	Network Cable 7’	809-0937
	Network Cable 10’	809-0938
	Network Cable 14’	809-0939
	Network Cable 25’	809-0940
	Network Cable 50’	809-0941
	Network Cable 75’	809-0942
Regulatory Approvals
CSA/NRTL certified to CSA 107.1, UL 458 (Marine Supplement)
ABYC designed to Marine Standards
FCC Class B/Industry Canada Class

Note: Specifications subject to change without notice.

To compare models, please download the Product Data Sheet.