Electrical Specifications - Inverter
Output power continuous 3000 watts
Surge rating (5 sec.) 4000 watts
Output current 50 A peak
Output voltage (at no load) 120 VAC +/-3%
Output voltage 120 VAC RMS
-10%/+4% (over full load & battery voltage range)
Output frequency* 60 Hz +/-0.05%
(*crystal controlled)
Output waveform True sine wave
<5% THD
Peak efficiency 88%
No load current draw (search mode)<3 W
No load current draw* <60 W
(*with inverter on)
Input DC voltage range (12 V) 10-16 VDC
Input DC voltage range (24 V) 20-32 VDC
Electrical Specifications - Charger
Charger rate (12V/24V) 120 A/60 A
Output voltage (nominal - depending on settings)
Charge (12V) 13.8-14.8 VDC
Charge (24V) 27.6-29.6 VDC
Float (12V) 13.1-14.2 VDC
Float (24V) 26.2-28.4 VDC
Equalize (12V) 14.0-18.0 VDC
Equalize (24V) 28.0-26.0 VDC
Charge control 3 stage with
manual equalize
Charge temp compensation 3 settings or
sensor
Efficiency >80%
AC input power factor 0.99
(*charger on)
Input AC voltage range 90 - 135 VAC
General Specifications
Compatible battery types Flooded/gel
Transfer relay rating 30 A
Transfer time* 20 ms typical
(*AC to inverter and inverter to AC)
Storage temp range -22°F - 158°F
-30°C - 70°C
Operating temp range 32°F - 140°F
0°C - 60°C
Dimensions (HxWxD) 7 x 15 x 20”
178x381x508 mm
Weight 32.0 lb (14.5 kg)
Warranty 2 years
Part numbers 805-3030 (12V)
805-3031 (24V)
808-3027 (GFCI)
808-3026
(DC wiring box)
808-2035 (ACS)
Regulatory Approvals
CSA/NRTL certified to CSA 107.1, UL 458 and UL 1741 standards
FCC Class A
Note: Specifications subject to change without notice.